- Home
- About Us
- Geothermal
- Pump Systems
- Grundfos Geothermal Pumps
- Wilo Geothermal Pumps
- Geothermal Grout
- Pipe
- Loops
- PVC Insulated Headers
- Fittings
- Socket Fusion Tools
- Butt Fusion Tools
- Plastic Solenoid Valves
- Hose Kits And Accessories
- Balancing Valves
- Zone Valves
- Glycol Make-up Systems
- Flush And Purge Dolly
- Geo-Loop Leak Seal and Conditioner
- Flow Meters
- Gauges And Thermometers
- Geothermal Expansion Tanks
- Fire Protection
- Fire Pump Manufacturers
- Packaged Fire Pumping Systems
- Fire Pump Accessories
- ETL Certification
- Fire Water Storage Tanks
- Fire Pump Control Panels
- Repair Parts
- Design
- Service Department
- News
- Contact Us
- Pump Systems
- Grundfos Geothermal Pumps
- Wilo Geothermal Pumps
- Geothermal Grout
- Pipe
- Loops
- PVC Insulated Headers
- Fittings
- Socket Fusion Tools
- Butt Fusion Tools
- Plastic Solenoid Valves
- Hose Kits And Accessories
- Balancing Valves
- Zone Valves
- Glycol Make-up Systems
- Flush And Purge Dolly
- Geo-Loop Leak Seal and Conditioner
- Flow Meters
- Gauges And Thermometers
- Geothermal Expansion Tanks
Geothermal Grout
BH20 Grout
A 20% solids, modified bentonite grout product which has been designed to be mixed with fresh water and pumped to its destination. BH 20 Grout requires no polymer additives and is a complete mineral base product. This product is certified by National Sanitation Foundation International to ANSI/NSF Standard 60, Drinking Water Treatment Chemicals – Health Effects. BH 20 Grout meets all minimum state regulations for grouting materials.
Once placed, BH 20 Grout will set into a semi-rigid plug. BH 20 Grout is also suitable for sealing well casings, decommissioning abandoned wells and Geothermal Heat Pump applications where thermal performance is not an issue.
The PDF linked below includes the following:
- Physical Specifications,
- Packaging Information,
- Mixing Instructions
Read more BH20 Thermal Grout Specifications. (PDF)
Read from 2nd data sheet (pdf)
Call Factory for pricing 866-522-0396
Thermal Grout Lite
Thermal Grout Lite is a unique bentonite-based two-part, field mixed, high to very-high solids, grouting material that can mixed to meet a range of thermal conductivity’s from 0.45 to 1.00 Btu/hr ft °F. It has been specifically developed for closed-loop ground-coupled heat pump applications where thermal conductivity in the vertical bore column is critical to system performance. This product is certified by the National Sanitation Foundation International to ANSI/NSF Standard 60, Drinking Water Treatment Chemicals – Health Effects. Thermal Grout Lite contains no chemical polymers or organic matter.
Thermal Grout Lite provides unequaled performance while offering the contractor proven advantages in handling and clean-up. When properly mixed, more than 30 minutes of working time is available before significant hydration occurs. Unlike many other bentonite grouting materials, Thermal Grout Lite does not flash hydrate.
Its percentage of solids will range from equivalent, to over 2 times greater than that of the best conventional bentonite grout products. As the solids percentage becomes higher, Thermal Grout Lite will require less water per delivered gallon of yield than other grout as well as a linear shrinkage potential which becomes less and less.
The PDF linked below includes the following:
- Physical Specifications,
- Packaging Information,
- Mixing Instructions,
- Thermal Conductivity Range – Mix Ratios,
- Quality Control,
- Field Quality Control,
Read more Thermal Grout Lite Specifications. (PDF)
Call Factory for pricing 866-522-0396
Thermal Grout Select
Thermal Grout Select is a unique bentonite-based two-part, field mixed, high to extreme-high solids, grouting material that can mixed to meet a range of thermal conductivity’s from 1.00 to 1.20 Btu/hr ft °F. It has been specifically developed for closed-loop ground-coupled heat pump applications where thermal conductivity in the vertical bore column is critical to system performance. This product is certified by the National Sanitation Foundation International to ANSI/NSF Standard 60, Drinking Water Treatment Chemicals – Health Effects. Thermal Grout Select contains no chemical polymers or organic matter.
Thermal Grout Select provides unequaled performance while offering the contractor proven advantages in handling and clean-up. When properly mixed, more than 30 minutes of working time is available before significant hydration occurs. Unlike many other bentonite grouting materials, Thermal Grout Select does not flash hydrate.
Its percentage of solids will range from equivalent, to over 2.5 times greater than that of the best conventional bentonite grout products. As the solids percentage becomes higher, Thermal Grout Select will require less water per delivered gallon of yield than other grout as well as a linear shrinkage potential which becomes less and less.
The PDF linked below includes the following:
- Physical Specifications,
- Packaging Information,
- Mixing Instructions,
- Thermal Conductivity Range – Mix Ratios,
- Quality Control,
- Field Quality Control,
Read more Thermal Grout Select Specifications. (PDF)
Call Factory for pricing 866-522-0396
